Phạm vi áp dụng
- The HD11F and HS11F series single-pole and double-pole knife switches with protective covers are newly developed products derived from the HD11 and HS11 series by our company. They are ideal replacements for HD11 and HS11, significantly improving personal safety protection performance and preventing accidental electric shock.
- This series of products is mainly used in low-voltage distribution equipment for infrequent manual making and breaking as well as isolation of power supply.
- This product complies with GB/T 14048.3 and IEC 60947-3 standards.
Model Designation
Normal Service and Installation Conditions
- Ambient air temperature not higher than +40 °C and not lower than -5°C.
- Installation altitude not exceeding 2000 m.
- Humidity: At a maximum temperature of +40 °C, the relative humidity of the air shall not exceed 50%. Higher relative humidity is permitted at lower temperatures (e.g., 90% at 20°C). Appropriate measures shall be taken against occasional condensation caused by temperature variations.
- Pollution degree of the surrounding environment is degree 3.
- The switch shall be installed in a location free from significant vibration, shock vibration and rain/snow exposure. The installation site shall be free from explosive media, and the medium shall contain no gases or dust sufficient to corrode metal or damage insulation.
Main Technical Parameters
| Conventional free-air thermal current (A) | 100 | 200 | 400 | 600 | 1000 | 1500 |
| Rated operational current (A) | 100 | 200 | 400 | 600 | 1000 | 1500 |
| Điện áp cách điện định mức (V) | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 |
| Rated operational voltage (V) | 400/690 | 400/690 | 400/690 | 400/ 690 | 400/690 | 400/690 |
| Mechanical endurance (operations) | 8000 | 8000 | 5000 | 5000 | 3000 | 3000 |
| 1 s short-time withstand current (kA) | 8 | 8 | 15 | 20 | 25 | 35 |
| Operating force (N) | ≤ 300 | ≤ 300 | ≤ 400 | ≤ 400 | ≤ 450 | ≤ 450 |
Outline and Mounting Dimensions (mm)
HD11F-400/□ 8 and Below
HD11F-600/□ 8 and Above
Baseplate Machining Mode: Compression Molded (Resin Plate, Glass Fiber Plate)
| Mô hình | Kích thước tổng thể | Mounting Dimensions | |||||||||||||
| A | B | E | F | H | h | J | K | L | O | P | M | Φ | C | D | |
| HD11F-100/38 | 140 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | / | 8 | 7 | 50 | 140 |
| HD11F-100/48 | 190 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | / | 8 | 7 | 100 | 140 |
| HD11F-200/38 | 200 | 200 | 70 | 160 | 210 | 110 | 110 | / | / | / | / | 8 | 7 | 70 | 140 |
| HD11F-200/48 | 270 | 210 | 70 | 160 | 220 | 115 | 110 | / | / | / | / | 8 | 7 | 140 | 140 |
| HD11F-400/38 | 210 | 260 | 80 | 210 | 260 | 126 | 146 | / | / | / | / | 12 | 7 | 80 | 190 |
| HD11F-400/48 | 300 | 270 | 80 | 210 | 270 | 130 | 146 | / | / | / | / | 12 | 7 | 160 | 190 |
| HD11F-600/38 | 260 | 332 | 100 | 160 | 300 | 133 | 240 | 40 | 61 | / | / | 16 | 9 | 100 | 140 |
Baseplate Machining Mode: Machined (Bakelite Plate, Epoxy Plate)
| Mô hình | Kích thước tổng thể | Mounting Dimensions | |||||||||||||
| A | B | E | F | H | h | J | K | L | O | P | M | Φ | C | D | |
| HD11F-100/38 | 140 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | / | 8 | 7 | 50 | 140 |
| HD11F-100/48 | 192 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | / | 8 | 7 | 100 | 140 |
| HD11F-200/38 | 190 | 190 | 70 | 160 | 210 | 110 | 110 | / | / | / | / | 8 | 7 | 70 | 140 |
| HD11F-200/48 | 270 | 210 | 70 | 160 | 220 | 115 | 110 | / | / | / | / | 8 | 7 | 140 | 140 |
| HD11F-400/38 | 210 | 260 | 80 | 210 | 260 | 126 | 146 | / | / | / | / | 12 | 7 | 80 | 180 |
| HD11F-400/48 | 300 | 270 | 80 | 210 | 270 | 130 | 146 | / | / | / | / | 12 | 7 | 160 | 190 |
| HD11F-600/38 | 270 | 332 | 100 | 170 | 300 | 133 | 239 | 40 | 61 | / | / | 16 | 9 | 100 | 140 |
| HD11F-600/48 | 340 | 332 | 90 | 170 | 300 | 133 | 239 | 40 | 61 | / | / | 16 | 9 | 180 | 140 |
| HD11F-1000/38 | 322 | 355 | 115 | 175 | 338 | 146 | 208 | 50 | 61 | 26 | 26 | 2-12 | 9 | 115 | 140 |
| HD11F-1000/48 | 440 | 355 | 115 | 175 | 338 | 146 | 208 | 50 | 61 | 26 | 26 | 2-12 | 9 | 230 | 140 |
| HD11F-1500/38 | 360 | 385 | 130 | 177 | 370 | 160 | 228 | 70 | 76 | 35 | 35 | 4-12 | 3 | 130 | 140 |
HD11F-400/□ 9 and Below
HD11F-600/□ 9 and Above
Baseplate Machining Mode: Machined (Bakelite Plate, Epoxy Plate)
| Mô hình | Kích thước tổng thể | Mounting Dimensions | |||||||||||||
| A | B | E | F | H | h | J | K | I | O | P | M | Φ | C | D | |
| HD11F-200/39 | 190 | 230 | 70 | 190 | 210 | 110 | 60 | 20 | 26 | / | / | 8 | 7 | 70 | 160 |
| HD11F-200/49 | 265 | 250 | 70 | 190 | 220 | 115 | 60 | 20 | 26 | / | / | 8 | 7 | 140 | 160 |
| HD11F-400/39 | 220 | 280 | 80 | 215 | 260 | 126 | 70 | 30 | 29 | / | / | 12 | 9 | 80 | 190 |
| HD11F-400/49 | 290 | 290 | 80 | 215 | 270 | 130 | 70 | 30 | 29 | / | / | 12 | 9 | 160 | 190 |
| HD11F-600/39 | 270 | 320 | 100 | 260 | 300 | 133 | 140 | 40 | 37 | / | / | 16 | 9 | 100 | 220 |
| HD11F-600/49 | 340 | 320 | 90 | 260 | 300 | 133 | 140 | 40 | 37 | / | / | 16 | 9 | 180 | 220 |
| HD11F-1000/39 | 325 | 360 | 115 | 290 | 338 | 146 | 160 | 50 | 23 | 26 | 26 | 2-12 | 9 | 115 | 260 |
| HD11F-1000/49 | 430 | 360 | 115 | 290 | 338 | 146 | 160 | 50 | 23 | 26 | 26 | 2-12 | 9 | 230 | 260 |
HS11F-400/□ 8 and Below, Front-of-Panel Wiring
HS11F-600/□ 8 and Above, Front-of-Panel Wiring
Baseplate Machining Mode: Compression Molded (Resin Plate, Glass Fiber Plate)
| Mô hình | Kích thước tổng thể | Mounting Dimensions | |||||||||||||
| A | B | E | F | H | h | J | K | L | O | P | M | Φ | C | D | |
| HS11F-100/38 | 140 | 280 | 50 | 165 | 190 | 65 | / | / | / | / | / | 5 | 7 | 40 | 115 |
| HS11F-100/48 | 170 | 280 | 50 | 165 | 190 | 65 | / | / | / | / | / | 5 | 7 | 92 | 115 |
| HS11F-200/38 | 190 | 320 | 70 | 240 | 220 | 85 | 170 | / | / | / | / | 8 | 7 | 70 | 200 |
| HS11F-200/48 | 256 | 360 | 70 | 220 | 240 | 82 | 170 | / | / | / | / | 8 | 7 | 140 | 220 |
| HS11F-400/38 | 216 | 425 | 80 | 312 | 290 | 105 | 243 | / | / | / | / | 12 | 7 | 80 | 280 |
| HS11F-400/48 | 296 | 440 | 80 | 312 | 300 | 100 | 243 | / | / | / | / | 12 | 7 | 160 | 280 |
Baseplate Machining Mode: Machined (Bakelite Plate, Epoxy Plate)
| Mô hình | Kích thước tổng thể | Mounting Dimensions | |||||||||||||
| A | B | E | F | H | h | J | K | L | O | P | M | Φ | C | D | |
| HS11F-200/38 | 190 | 320 | 70 | 220 | 220 | 85 | 170 | / | / | / | / | 8 | 7 | 70 | 220 |
| HS11F-200/48 | 265 | 360 | 70 | 220 | 240 | 82 | 170 | / | / | / | / | 8 | 7 | 140 | 220 |
| HS11F-400/38 | 220 | 425 | 80 | 312 | 290 | 105 | 243 | / | / | / | / | 12 | 9 | 80 | 280 |
| HS11F-400/48 | 290 | 440 | 80 | 312 | 300 | 100 | 243 | / | / | / | / | 12 | 9 | 160 | 280 |
| HS11F-600/38 | 270 | 455 | 100 | 250 | 300 | 90 | 319 | 40 | / | / | / | 16 | 9 | 100 | 220 |
| HS11F-600/48 | 340 | 455 | 90 | 250 | 300 | 90 | 319 | 40 | / | / | / | 16 | 9 | 180 | 200 |
| HS11F-1000/38 | 325 | 520 | 115 | 250 | 340 | 110 | 340 | 50 | / | 26 | 26 | 2-12 | 9 | 115 | 220 |
| HS11F-1000/48 | 430 | 520 | 115 | 250 | 340 | 110 | 340 | 50 | / | 26 | 26 | 2-12 | 9 | 230 | 220 |
HS11F-400/□ 8 and Below, Front-of-Panel Incoming / Rear-of-Panel Outgoing
HS11F-600/□ 8 and Above, Front-of-Panel Incoming / Rear-of-Panel Outgoing
Baseplate Machining Mode: Machined (Bakelite Plate, Epoxy Plate)
| Mô hình | Kích thước tổng thể | Mounting Dimensions | ||||||||||||||
| A | B | E | F | H | h | J | K | I | N | O | P | M | Φ | C | D | |
| HS11F-200/38 | 190 | 320 | 70 | 220 | 220 | 85 | 170 | 20 | 26 | / | / | / | 8 | 7 | 70 | 220 |
| HS11F-200/48 | 265 | 360 | 70 | 220 | 240 | 82 | 170 | 20 | 26 | / | / | / | 8 | 7 | 140 | 220 |
| HS11F-400/38 | 220 | 425 | 80 | 312 | 290 | 105 | 243 | 30 | 29 | / | / | / | 12 | 9 | 80 | 280 |
| HS11F-400/48 | 290 | 440 | 80 | 312 | 300 | 100 | 243 | 30 | 29 | / | / | / | 12 | 9 | 160 | 260 |
| HS11F-600/38 | 270 | 455 | 100 | 250 | 300 | 90 | 319 | 40 | 37 | 30 | / | / | 16 | 9 | 100 | 220 |
| HS11F-600/48 | 340 | 455 | 90 | 250 | 300 | 90 | 319 | 40 | 37 | 30 | / | / | 16 | 9 | 180 | 200 |
| HS11F-1000/38 | 325 | 520 | 115 | 250 | 340 | 110 | 297 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 115 | 220 |
| HS11F-1000/48 | 430 | 520 | 115 | 250 | 340 | 110 | 297 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 230 | 220 |
HS11F-400/□ 9 and Below
HS11F-600/□ 9 and Below
Baseplate Machining Mode: Machined (Bakelite Plate, Epoxy Plate)
| Mô hình | Kích thước tổng thể | Mounting Dimensions | ||||||||||||||
| A | B | E | F | H | h | J | K | I | N | O | P | M | Φ | C | D | |
| HS11F-200/39 | 190 | 320 | 70 | 245 | 220 | 85 | 120 | 20 | 26 | / | / | / | 8 | 7 | 70 | 220 |
| HS11F-200/49 | 265 | 360 | 70 | 245 | 240 | 82 | 120 | 20 | 26 | / | / | / | 8 | 7 | 140 | 220 |
| HS11F-400/39 | 220 | 425 | 80 | 285 | 290 | 105 | 140 | 30 | 29 | / | / | / | 12 | 9 | 80 | 260 |
| HS11F-400/49 | 300 | 440 | 80 | 285 | 300 | 100 | 140 | 30 | 29 | / | / | / | 12 | 9 | 160 | 260 |
| HS11F-600/39 | 270 | 455 | 100 | 340 | 300 | 90 | 220 | 40 | 37 | 30 | / | / | 16 | 9 | 100 | 300 |
| HS11F-600/49 | 340 | 455 | 90 | 340 | 300 | 90 | 220 | 40 | 37 | 30 | / | / | 16 | 9 | 180 | 300 |
| HS11F-1000/39 | 330 | 520 | 115 | 390 | 340 | 110 | 250 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 115 | 350 |
| HS11F-1000/49 | 435 | 520 | 115 | 390 | 340 | 110 | 250 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 230 | 350 |
Ordering Instructions
When placing an order, the customer must specify the switch type characteristics, voltage rating, current rating, number of poles, operating method, quantity, etc. For special orders, please consult our company’s technical department.
Example: HD11F-200/38, 10 units. The default voltage rating of this product is 400 V. If a special voltage rating is required, please note it after the model number.
Đánh giá
Chưa có đánh giá nào.